Advanced Anti-Termite Treatment
Protect your property from silent destruction. We specialize in post-construction drill-and-inject treatments and pre-construction soil barriers. Backed by a 10-year warranty for new constructions in Thane, Navi Mumbai, and Raigad.

The Ultimate Guide to Termite Control and Structural Protection
Termites, frequently referred to in India as "white ants," are arguably the most destructive and financially devastating pests a property owner can ever face. Operating entirely in the dark, they quietly hollow out the wooden structures of your home, office, or factory. By the time the damage becomes visible on the surface, the internal structure is often completely destroyed. In the humid, coastal, and rapidly developing zones of Thane, Navi Mumbai, and Raigad, subterranean termites thrive in the soil and constantly seek pathways into residential and commercial buildings. At Maharashtra Pest Control Services (MPC), we have been the region's leading experts in anti-termite treatments since 1999, saving our clients millions of rupees in potential property damage.
Understanding the Silent Destroyers: How Termites Work
The termites most commonly found in Maharashtra are Subterranean Termites. Unlike wood borers that live entirely inside a single piece of furniture, subterranean termites live in massive colonies deep underground. A single colony can contain hundreds of thousands of workers, soldiers, and a queen that can live for over a decade, laying thousands of eggs a day.
These termites need moisture to survive. To reach the cellulose (wood, paper, drywall, cotton) inside your home without exposing themselves to dry air and sunlight, they build distinctive "mud tubes." They travel from the soil, up the foundation of your building, through microscopic cracks in the concrete, and into your door frames, wardrobes, and structural beams. They eat the wood from the inside out, leaving a paper-thin veneer of paint or polish on the outside. This is why termite damage often goes unnoticed until a door frame suddenly collapses or a wooden panel sounds hollow when tapped.
Signs You Need Immediate Termite Control
Early detection is the only way to prevent massive repair bills. You should schedule an emergency inspection with MPC if you notice any of the following signs:
- Mud Tubes: Pencil-sized tunnels made of dirt and saliva running up your exterior walls, along skirting boards, or emerging from electrical switchboards.
- Hollow-Sounding Wood: Tap on your wooden doors, window frames, and fixed cabinets. If they sound hollow or papery, termites may have eaten the core.
- Bubbling Paint or Peeling Wallpaper: Termites produce moisture as they eat and build tunnels. This moisture often causes the paint on walls and woodwork to bubble, peel, or look water-damaged.
- Discarded Wings (Swarmers): During the monsoon transition, reproductive termites (alates) fly out to start new colonies. Finding piles of identical, translucent wings near windowsills or light fixtures is a massive red flag that a colony is active nearby.
Why DIY Termite Control is a Costly Mistake: Spraying kerosene, acid, or standard bug spray on a mud tube is the worst thing you can do. It kills the few worker termites on the surface, but it signals danger to the colony. The termites will simply retreat, abandon that tunnel, and find a hidden, deeper route into your home. To eliminate termites, you must use specialized non-repellent chemicals that the workers carry back deep into the soil to kill the queen. Only a professional drill-and-inject method can achieve this.
Post-Construction Treatment: The Drill-Fill-Seal Method
If your home or office is already built and facing an active termite infestation, we utilize the highly proven Drill-Fill-Seal method. This creates a lethal chemical barrier between the soil and your woodwork.
Our technicians use heavy-duty masonry drills to create small holes (usually 12mm) at a 45-degree angle along the junction of your walls and floors (the skirting level). We drill these holes at regular intervals around the perimeter of the infested rooms. Using specialized pressure pumps, we inject a potent, government-approved termiticide deep into these holes, saturating the masonry and reaching the soil below. This chemical barrier instantly kills termites trying to enter. Finally, we seal the holes with white cement or matching putty, ensuring the aesthetics of your room are maintained. We also carefully treat all infested wooden fixtures, door frames, and wardrobes using syringe injections.
Pre-Construction Treatment: The 10-Year Warranty
The absolute best time to protect a building from termites is before it is even built. If you are constructing a new bungalow, housing society, or commercial facility, our Pre-Construction Anti-Termite Treatment is a mandatory investment.
We treat the soil in multiple critical phases during the construction process: at the foundation trenches, the backfill, the plinth level before laying the floor slab, and finally the external perimeter. By saturating the earth with specialized termiticides before the concrete is poured, we create an impenetrable chemical shield beneath the entire building.
Because we are so confident in our pre-construction methodology, MPC proudly offers a 10-Year Warranty on pre-construction treatments for RCC (Reinforced Cement Concrete) and masonry structures. If termites breach the barrier within a decade, we will re-treat the area at absolutely no cost to you.
Protect Your Biggest Investment
Your property is likely the most expensive investment you will ever make. Do not let microscopic insects destroy its value. Whether you are dealing with a sudden outbreak in your apartment or laying the foundation for a new commercial complex, Maharashtra Pest Control Services has the industrial equipment, the premium chemicals, and the 27+ years of expertise required to stop termites dead in their tracks. Contact us today for a definitive solution to your termite problems.
Our Post-Construction Termite Treatment Process
We eliminate existing termite colonies by creating an impenetrable chemical barrier at the foundation of your interiors.
1. Deep Inspection
We trace mud tubes, test wooden frames, and assess the layout of your property to identify the exact entry points from the ground.
2. Precision Drilling
We carefully drill 12mm holes at the junction of the wall and floor (skirting level) at regular intervals to access the masonry and soil below.
3. Pressure Injection
Using high-pressure pumps, we inject a specialized, non-repellent termiticide deep into the holes to form a continuous chemical barrier.
4. Sealing & Wood Treatment
We seal all drilled holes with white cement/putty. We then treat infested door frames and furniture via syringe injection to eliminate localized workers.
Frequently Asked Questions
Will drilling holes damage my expensive floor tiles or marble?
No. Our highly trained technicians use specialized masonry drills. We carefully drill at the junction where the wall meets the floor (the skirting), avoiding the center of your tiles. Once the chemical is injected, we neatly seal the small holes with white cement or chalk mitti, making them barely noticeable.
How does the 10-Year Warranty work for new constructions?
Our 10-year warranty applies strictly to Pre-Construction Anti-Termite Treatments on RCC and masonry structures. Because we treat the soil at multiple stages before the concrete is poured, the barrier is incredibly strong. If any termite activity is detected within 10 years of completion, we will perform localized re-treatment free of charge.
How long does a post-construction termite treatment take?
For a standard 2BHK or 3BHK flat, the entire Drill-Fill-Seal process usually takes between 3 to 5 hours, depending on the severity of the infestation and the amount of fixed wooden furniture that requires treatment.
Do I need to leave the house during the treatment?
Because the termiticide used has a noticeable odour during the application phase, we advise residents (especially children, pregnant women, and pets) to vacate the premises during the treatment. You can safely return after 4 to 6 hours once the space has been adequately ventilated and the chemical has settled into the masonry.
Contact Details
Address
Office No. 79, Shiv Anand Sankul, LBS Road, Near Makhamali Talao, Thane, Maharashtra 400602
Phone
+91 98190 67666
+91 90391 15337
+91 98690 26576
Email
info@mahapestcon.com

